Isolation Sluice Gates EG1
Isolation sluice gate EG-1 top of gates producing lines considering low leakage performance. It is designed to resist up to 10 meters of both seating and unseating heads. The leakage rate measured at 6 m head was found to be 0.01 lit/min/meter of sealing perimeter (almost no leakage). The advantage of almost no leakage is achieved using wedging action provided by an inclined frame
1. Frame
2. Guides and side seals
3. Compression cord
4. Bottom seal
5. Slide
6. Top seal
mare
Yoke:
Stem:shall be made of stainless steel type
304L or 316 L
Sides;
Fasteners:
Guides and seals: Shal be made of UHMWPE
Compression cord: EPDM
Bottom seal: EPDM